Corollary equipment

1.Drum-type screening machine

The drum-type screening machine is a new generation of new self-cleaning special equipment after the electric vibrating screen and the ordinary mesh drum screen produced by major domestic companies. It is widely used for various solid materials with a particle size of less than 300mm. It has many characteristics such as high screening efficiency, low noise, small dust volume, long service life, small maintenance, and convenient maintenance. Its screening capacity is 1 ton/hour to 20 tons/hour.

The self-cleaning cage drum screening machine uses a gearbox-type deceleration system to reasonably rotate the central separation drum of the equipment. The central separation drum is a screen composed of several circular flat steel rings. The central separation drum is installed on the ground level. In an inclined state, the material enters the cylinder net from the upper end of the central separation cylinder during work. During the rotation of the separation cylinder, the fine material is separated from the top to the bottom through the screen interval composed of circular flat steel, and the coarse material is separated from the lower end of the separation cylinder. Discharge into the shredder. The equipment is equipped with a plate-type automatic cleaning mechanism. During the separation process, through the relative movement of the cleaning mechanism and the sieve body, the sieve body is continuously "combed" by the cleaning mechanism, so that the sieve body is always kept clean during the entire working process, which will not affect the screening efficiency due to the clogging of the sieve holes.

Model

Power (kW)

Reducer model

Drum speed(r/min)

Screening yield(t/h)

SDGS-1030

3

ZQ250

21

2-3

SDGS-1240

4

ZQ250

18

3-5

SDGS-1560

5.5

ZQ350

16

6-10

SDGS-1870

11

ZQ400

13

15-20

SDGS-2080

11

ZQ450

12

10-20

Note: technical data is subject to change without prior notice.

2.Static dosing machine

Static parallel batching equipment is used in fertilizer production when raw materials need to be batched quantitatively. The machine is mainly composed of feeding system, weighing device, silo and conveyor belt. It has a high degree of automation and only needs manual feeding. It can save much time and production costs, and meet the national measurement standards.

3.Dynamic automatic dosing system

The dynamic batching machine is suitable for the site where continuous batching is required, such as fertilizer batching and coking batching.These sites have high requirements for the continuity of batching, generally do not allow the stop of intermediate batching, and have strict requirements for the proportioning of various materials. The dynamic batching system generally adopts electronic belt scale or nuclear scale as the metering equipment. The host has PID adjustment and alarm functions, which can realize automatic control of a warehouse.

4. Forklift feeding machine

The forklift feeding machine is a kind of conveying equipment for bulk materials. Forklift feeder equipment can transport both fine materials with a particle size of 5mm or less, as well as bulk materials with a particle size of more than 1m. It has the functions of strong adaptability, adjustable conveying capacity and continuous and uniform conveying of various materials. The organic fertilizer forklift feeder equipment is equipped with anti-smashing nets, vibration and anti-blocking devices, and frequency conversion speed regulation devices, which can achieve uniform discharge and accurate control of the discharge volume.

Model

(kW)
Power

(t/h)
Production capacity

(mm)
Overall dimension

SDCW-2030

(2.2kW)
(0.37kW)
(4kW)
Mixing power: (2.2kW)
Vibrationpower:(0.37kW) Transmission power: (4kW frequency conversion)

3-10

4250x2200x2730

SDCW-2040

(2.2kW)
(0.37kW)
(4kW)
Mixing power: (2.2kW)
Vibration power: (0.37kW) Transmission power: (4kW frequency conversion)

10-20

4811x2200x2730

5.Buffered stock bin

The Buffered stock bin is a buffer device installed on the drum screening machine and packaging machine. There is only a small hopper on the upper part of the packaging machine, which requires the operator to not stop. The lower part of the buffer bin opens according to the angle of the belt conveyor to prevent material blockage. Buffer support is provided when the packaging machine operator leaves for a period of time or in operation gap. The belt conveyor at the lower part of the buffer silo uses a frequency conversion motor, and the speed of the belt conveyor is automatically adjusted with the output speed of the packaging machine.


Model

(t/h)
Capacity

(mm)
Overall dimension

SDHL-1220

2-5

2300x1400x2400

6.Single (double) hopper automatic packing scale

Automatic quantitative packaging scale is designed for quantitative packaging, and is divided into double-bucket packaging scales and single-bucket packaging scales. It adopts an integrated structure, with small scale height, compact structure, energy saving and high efficiency, novel appearance, simple installation, convenient maintenance. The quantitative accuracy of the system is two thousandths.

Main Technical Parameters:



Model/specification/index

Weighing range

Packaging accuracy

Packing rate

Display undivided value

working environment


working power


Working air source

single

average

Single weighing

temperature


Relative humidity

Voltage

frequency

Air pressure

frequency

SD-50

25-50

<±0.2%

<±0.1%

300-400

0.01

-10-40°

<95%

AC220V

50Hz

0.4-0.6Mpa

<0.5m3/h

Special model

>100


It can be customized according to client's requirement


Sewing machine, automatic counting machine, infrared trimming machine and folding machine, can be optional according to customer requirements.

7.Rotary Coating Machine

The complete set of rotary coating machine is composed of screw conveyor, mixing tank, oil pump, main engine, etc. It adopts powder dusting or liquid coating technology, which can effectively prevent the agglomeration of compound fertilizers. It is an effective special compound fertilizer. equipment.


Model

(kW)
Power


Reducer model


Installation tilt angle (°)


Rotating speed

SDBM-1240

5.5

ZQ350

2-3

11

SDBM-1560

11

ZQ400

2-3

11

SDBM-1870

18.5

ZQ500

2-3

10

SDBM-2080

22

ZQ650

2-3

10

8.Conveying Equipment

Mobile belt conveyor is a kind of continuous conveying and loading equipment with high-efficiency and good mobility. It is mainly used in places where loading and unloading locations change frequently, such as: ports, wharfs, stations, coal yards, warehouses, construction sites, and gravel yards. , Farms, etc., used for short-distance transportation and loading and unloading of bulk materials or articles weighing less than 100 kg per piece.

Screw conveyor
Spiral conveyor
Mobile belt conveyor
Mobile belt conveyor
Diagonal screen type solid-liquid separator

Diagonal screen type solid-liquid separator is a new type of high-efficiency solid-liquid separation, squeezing and dehydration machinery. The inclined screen filtration and extrusion dehydration are completed by one machine, which has the characteristics of low power, high efficiency, low operation cost, low purchase cost, small land occupation, simple operation, easy maintenance, no vulnerable parts, fast investment recovery and no need to add any flocculants.

9.Solid Liquid Separator

The solid-liquid separator is a kind of dehydrator for livestock manure, drug residue and wine residue. It can separate the raw fecal water of livestock manure such as pig manure, duck manure, cow manure and chicken manure into liquid organic fertilizer and solid organic fertilizer.

10.Cyclone Dust Collector

The cyclone dust collector is a kind of dust removal device. The dust removal mechanism is to make the dusty air flow rotate, separate the dust particles from the air flow and trap them on the wall with the help of centrifugal force, and then make the dust particles fall into the ash hopper with the help of gravity. Each component of the cyclone dust collector has a certain size proportion. Every change in the ratio relationship can affect the efficiency and pressure loss of the cyclone dust collector, The diameter of the dust collector, the size of the air inlet, and the diameter of the exhaust pipe are the main influencing factors. It should be noted in use that when a certain limit is exceeded, favorable factors can also be transformed into unfavorable factors. In addition, some factors are beneficial to improve the dust removal efficiency, but will increase the pressure loss. Therefore, the adjustment of various factors must be taken into account.




Get Price And Support

Simply complete the form below,click submit, you will get the price list and our representative will contact you within one business day.Please also feel free to contact us by Email: [email protected] ( * Denotes a required field).